Industrial Automatic Brush Self-Cleaning Filter Strainer
Introduction For Industrial Automatic Brush Self-Cleaning Filter Strainer
HUATAO Automatic Brush Self-Cleaning Filter delivers steady continuous purification for industrial water. It efficiently filters out suspended solids and particulate impurities, provides reliable protection for downstream equipment and boosts production efficiency.
Technical Parameters For Industrial Automatic Brush Self-Cleaning Filter Strainer
| Filter Model |
Filter Inner Dia. |
Filter Height |
Thickness |
Filter Area |
Filtration Precision |
| HT-D219 |
250mm |
1000 |
3 |
0.2 |
50microns |
| HT-D273 |
300mm |
1450mm |
4mm |
0.5 |
| HT-D325 |
350mm |
1600mm |
4mm |
0.6 |
| HT-D400 |
450mm |
1700mm |
6mm |
0.7 |
| HT-D450 |
500mm |
1750mm |
6mm |
0.9 |
| HT-D550 |
600mm |
1850mm |
6mm |
2.0 |
| HT-D800 |
850mm |
2000mm |
6mm |
2.5 |
Working Principle For Industrial Automatic Brush Self-Cleaning Filter Strainer
1)Automatic cleaning:
When the filtration time reaches the set value, the automatic cleaning process will be started: electronic control system Give a signal, the motor starts to work, the motor rotates to drive the drive shaft to rotate, the scraper removes the impurities accumulated on the filter screen, and the motor stops working after the cleaning time reaches the set value. The blowdown valve is opened and blowdown begins.
2)Pressure differential cleaning (optional):
When the pressure difference between the liquid inlet and the liquid outlet reaches the set value, the motor starts to work, the motor rotates to drive the drive shaft to rotate, and the scraper removes the impurities accumulated on the filter screen. After the cleaning time reaches the set value , the motor stops working.
3)Manual cleaning:
The motor runs continuously, driving the drive shaft to rotate, and the scraper continuously removes the impurities on the filter screen. When the time set value is reached, the sewage valve is manually opened to start sewage.
How to Cleaning inside the filter?
1.Close the inlet valve, close the outlet valve, then open the blowdown valve, and close the blowdown valve after
draining the filter
2. Stop the filter and turn off the power of the control box
3. Open the exhaust valve and remove the fixing screws of the upper cover
4. Rotate the handwheel to open the upper cover, and the inside of the filter can be thoroughly cleaned at this time
Application Industry For Industrial Automatic Brush Self-Cleaning Filter Strainer
water treatment, paper making,petrochemical, sanitary, paint, ink,grease, food and beverage, etc.
Product Tags:
|
|
Industrial Automatic Brush Self-Cleaning Filter Strainer Images
|
