Automatic Brush Type Self-cleaning Filter Housing
Introduction For Automatic Brush Type Self-cleaning Filter Housing
HUATAO Automatic Brush Self-Cleaning Filter is a high-performance filtration solution engineered for uninterrupted liquid purification. It effectively traps suspended solids, granular contaminants and other unwanted impurities from the fluid, well safeguarding downstream production equipment and greatly enhancing overall operational efficiency.
Technical Parameters For Automatic Brush Type Self-cleaning Filter Housing
| Filter Model |
Filter Inner Dia. |
Filter Height |
Thickness |
Filter Area |
Filtration Precision |
| HT-D219 |
250mm |
1000 |
3 |
0.2 |
50microns |
| HT-D273 |
300mm |
1450mm |
4mm |
0.5 |
| HT-D325 |
350mm |
1600mm |
4mm |
0.6 |
| HT-D400 |
450mm |
1700mm |
6mm |
0.7 |
| HT-D450 |
500mm |
1750mm |
6mm |
0.9 |
| HT-D550 |
600mm |
1850mm |
6mm |
2.0 |
| HT-D800 |
850mm |
2000mm |
6mm |
2.5 |
Working Principle For Automatic Brush Type Self-cleaning Filter Housing
1)Automatic cleaning:
When the filtration time reaches the set value, the automatic cleaning process will be started: electronic control system Give a signal, the motor starts to work, the motor rotates to drive the drive shaft to rotate, the scraper removes the impurities accumulated on the filter screen, and the motor stops working after the cleaning time reaches the set value. The blowdown valve is opened and blowdown begins.
2)Pressure differential cleaning (optional):
When the pressure difference between the liquid inlet and the liquid outlet reaches the set value, the motor starts to work, the motor rotates to drive the drive shaft to rotate, and the scraper removes the impurities accumulated on the filter screen. After the cleaning time reaches the set value , the motor stops working.
3)Manual cleaning:
The motor runs continuously, driving the drive shaft to rotate, and the scraper continuously removes the impurities on the filter screen. When the time set value is reached, the sewage valve is manually opened to start sewage.
How to Cleaning inside the filter?
1.Close the inlet valve, close the outlet valve, then open the blowdown valve, and close the blowdown valve after
draining the filter
2. Stop the filter and turn off the power of the control box
3. Open the exhaust valve and remove the fixing screws of the upper cover
4. Rotate the handwheel to open the upper cover, and the inside of the filter can be thoroughly cleaned at this time
Application Industry For Automatic Brush Type Self-cleaning Filter Housing
water treatment, paper making,petrochemical, sanitary, paint, ink,grease, food and beverage, etc.
Product Tags:
|
|
Automatic Brush Type Self-cleaning Filter Housing Images
|
